[Fixed] Windows 10/11 Update Error Code 0x80244018

Error Code 0x80244018 is Windows 10/11 Update Error takes place when the customer wants to set up or install  the new updates on windows10/11. The server receives the request of putting in updates. But usually, the server receives busy, and updating documents can’t attain the server. This can be due to the fact of corrupt windows updating files, activation of antivirus software, or some incorrect settings of your device or system. 

Error Code 0x80244018

Reasons for this windows 10/11 update Error Code 0x80244018 :  

  1. Interference of Third-party software
  2. VPN or Proxy issue
  3. Corrupt System Files
  4. Disabled BIT service
  5. The Background Intelligent Transfer Service is disabled.
  6. Windows Update component service 

 Uninstall Third-Party Antivirus Software

The Windows 10/11 Update error code 0x80244018 may additionally might be about with the aid of the third-party antivirus software. So, in order to restore this Windows 10 error 0x80244018, you can pick to uninstall the third-party antivirus software

  1. Type Control Panel in the search field of Windows update and pick the best-matched one.
  2. Type the main interface of the Control Panel.
  3. In the pop-up window, select Uninstall an application below the Programs section.
  4. In the pop-up window, choose the third-party antivirus software program and right-click it. Then pick Uninstall to continue. 
  5. When the technique is finished, you have uninstalled the third-party antivirus software. Then you can reboot your system and run Windows 10/11 Update once more to take a look at whether or not the windows 10/11 update error 0x80244018 is solved.

Disable Proxy Server Connection

  1. Press Windows key and R key collectively to open Run dialog, then type ms-settings:network-proxy in the container and click on OK to continue.
  2. In the pop-up window, navigate to the Manual Proxy Setup and then alternate the toggle to Off under Use a proxy server. 

When it is done, reboot your system and check whether the Windows 11 update error 0x80244018 is solved

SFC Scan to fix windows 10/11 update Error Code 0x80244018

SFC SCAN is a command line that we use to do this process. I will provide a clarification for the steps in the component on how to characterize this scan.

  • Perform SFC scan
  • Firstly, open Command Prompt and Run as administrator

SFC SCAN

  • After that, use the following command and press Enter
  • sfc /scannow
  • Finally, reboot your system

By following this method, you will get an amazing end result pointing out that all issues are solved. If the System File Checker cannot restore the corrupt system files, 

You can run the DISM device again.

  • Open Command Prompt as administrator.

Dism scan

  • Type the command dism /online /cleanup-image /restorehealth and hit Enter after every command.
  • When it is finished, reboot your pc and take a look at whether or not the Windows replace error 0x80244018 is solved.

Reset Windows 10/11 Update

Reset the Windows 10/11 Update elements by means of executing the following instructions in a command prompt run as an administrator:

  • net stop wuauserv
  • net stop cryptSvc
  • net stop bits
  • net stop msiserver
  • ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
  • ren C:\Windows\System32\catroot2 catroot2.old
  • net start wuauserv
  • net start cryptSvc
  • net start bits
  • net start msiserver

If these steps no longer resolve the issue, it is encouraged that the customer contact Microsoft support  for assistance.

If this problem still exists in  windows 10 /11 update. 

In case we need to reset the Windows 10 /windows 11 run system. Follow the given steps how to reset the system

Disclaimer: We propose you do the back up before we proceed these steps, at some stage in reset Windows 11 and Windows 10 Error Code 0x80244018 set up the capacity that all your archives files and settings will be displaced in the reset process.

How to reset windows 10 ?

  1. 1.Choose the Start button > Settings > System > Recovery, and then Open Recovery settings.
  2. Go to Reset this PC, choose out a preference to Reset PC. Then select from the choices and/or settings in the given desk below

How to reset home windows 11 ?

  1. 1.Choose the Start button > Settings > System > Recovery, and then Open Recovery settings.
  2. Go to Reset this PC, select out a preference to Reset PC. Then pick out from the picks and/or settings in the given desk below

In Conclusion,

Take support from Online experts regarding any unresolved issues on your computer. As a result,  chat with our Technician to fix your computer issues Now! You can also visit our website for more details and information.

Solutions to Fix Windows 10/11 Update Error Code 0X80242006

The Windows 10/11 Update Error Code 0x80242006 seems when something is wrong in your PC and you strive to Update Windows 10 /11 . This error 0x80242006 stops your PC from downloading and deploying the latest version of updates from Microsoft Update Server. In this article, I will provide an explanation for all the possible approaches by which you can remove or delete this issue completely from your PC.

Error code 0x80242006

Causes of this Windows 10/11 update Error Code 0x80242006 :  

  • Corrupted system files
  • Missing core files
  • Registry file corruption
  • Outdated or incompatible driver installed
  • Corruption in Windows 10 Update Components is the main reason behind this error 0x80242006  message .

 Using Advanced System Repair Tool to fix : 

As noted above that this update error 0x80242006 could possibly take place due to corrupted system files, broken core documents or corruption in registry files, you should use Advanced System Repair Tool to restore this issue efficiently. This device tool is used to scan the PC towards the problems or errors in the PC and optimize them simply in a single click. It is an all-in-one PC care device that takes care of your PC position and permits you to work on your system without getting any error code 0x80242006 similar problems.

Windows Troubleshoot to fix to Error Code 0x80242006

  • Firstly, go to the Start menu

Windows troubleshoot

  • Click –  Settings option to open the settings and customize the fields of your PC or system
  • Next, click on Search button and then click on Troubleshoot option
  • Once you tap on to Troubleshoot option  go to  “Other Troubleshooter” way .
  • Similarly, in the Other Troubleshooter tab, select the fourth option “Windows Update” and hit on Run button
  • Windows Troubleshoot
  •  It shows that Windows Troubleshooting is done and the troubleshooter made some changes to their PC or certain devices .
  • At last tap on the Yes button to fix this issue
  • Windows Troubleshoot

SDF Cleaning Method

In this step, we re-edit  the software program distribution folder through deleting of all detailed documents or files  in it.

  • Go to C:/ drive, then open the home windows named folder in it 
  • Open Software Distribution folder (SDF)
  • Open the Data Store folder and then delete all archives and folders in it
  • Again go back to the Software Distribution folder, open the Download folder and delete all files in it
  • Note: while deleting, it can additionally be instantaneous for admin permission. If you are logged in as an admin user.

Run and  Sfc scan to fix  windows 10/11 Error Code 0x80242006

  1. Click Win + X to open the Power User menu.
  2. Select the Run alternative from the menu list. Alternatively, use the Win + R keyboard 
  3. shortcut once directly to get access to the Run command box.
  4. Type “cmd” in the text box container and press Ctrl + Shift + Enter.
  5. When UAC seems on the screen, click on Yes to open the Command instantaneous as an administrator.
  6. In the Command Prompt window, type the under command and hit Enter:

SFC SCAN

  1. sfc /scannow
  2. Wait for the scan to complete. This might also take a while, so be patient.

Sfc scan to fix  windows 10/11 update Error code 0X80242006

  • Right click windows start button 
  • Select Terminal ( Admin )
  • Type in sfc /scannow and click enter, wait till scan completes.

Reset Windows 10/11 Update 

Reset the Windows 10/11 Update components by executing the following commands in a command prompt run as an administrator:

net stop wuauserv

net stop cryptSvc

net stop bits

net stop msiserver

ren C:\Windows\SoftwareDistribution Software Distribution.old

ren C:\Windows\System32\catroot2 catroot2.old

net start wuauserv

net start cryptSvc

net start bits

net start msiserver

If these steps do not resolve the issue, it is recommended that the user contact Microsoft support for further assistance.

If this issue still exists in windows 10 /11 update.

In  case we want to reset the Windows 10 / windows 11 running system. Follow the given steps how to reset the system

Disclaimer: We suggest you do the back up earlier than we proceed these steps, at some stage in reset Windows 11 and home windows 10 set up the ability that all your documents and settings will be misplaced in the course of the reset process.

Reset home windows 10 ?

1.Choose the Start button > Settings > System > Recovery, and then Open Recovery settings.

  1. Go to Reset this PC, pick out a choice to Reset PC. Then pick from the selections and/or settings in the given desk below

Reset  home windows 11 ?

1.Choose the Start button > Settings > System > Recovery, and then Open Recovery settings.

  1. Go to Reset this PC, pick out a choice to Reset PC. Then pick from the selections and/or settings in the given desk below

In conclusion,

If you have problem in doing this method, we recommend you to chat with our experts. I am sure they will guide you and help resolve this issue. You can also visit website for more details and information.

More details for this method at https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows

Solutions to fix Windows 10 Update Error code 0x80041015

Assured Assist Tech

 

Error code 0x80041015 is a common issue that users face while trying to install updates on their Windows system. This error message usually indicates that the update has failed and displays the Windows 10 update error code 0x80041015. There could be several reasons why this error occurs, such as a conflict with an antivirus program, firewall settings, or an issue with the Windows Update service.

Error code 0x80041015

To resolve this windows 10 update error 0x80041015 ,users can follow a few simple steps:

Disable any antivirus program or firewall temporarily to check if it is causing the issue.

Temporarily disabling Defender or Antivirus

Procedure to disable windows firewall:

Disabling the Windows Firewall can leave your computer vulnerable to security threats. Only do this if you’re sure that you have another form of protection in place, such as a hardware firewall or a third-party firewall.

Here’s how you can disable the Windows Firewall on a Windows 10 computer:

1. Open the Start menu by clicking on the Windows 10 icon in the bottom left corner of the screen.

2. Type “firewall” in the search bar and select “Windows Security Firewall” from the list of results.

3. In the Windows Security Firewall settings, click on “Turn Windows Defender Firewall on or off” on the left side of the window.

4. Select “Turn off Windows Defender Firewall (not recommended)” under both the “Public network settings” and “Private network settings” sections.

5. Click on “OK” to save the changes.

After following these steps, the Windows Firewall will be disabled on your computer. To re-enable the Windows Firewall, simply repeat these steps and select “Turn on Windows Defender Firewall” instead of “Turn off Windows Defender Firewall.

Procedure to disable Antivirus:

  1. Open an Antivirus application installed on the computer.
  2. After that, click to settings, go to real time protection and next Turn Off
  3. Select Turn Off real time protection option .
  4. Navigate to the Antivirus firewall.
  5. Turn off the Antivirus firewall.

Restart the Windows 10 Update service :

  • Go to “Services” in the Windows search bar,
  • Find the “Windows Update” service, 
  • And right-click on it
  • Choose “Restart or reboot ” option 

Run the Windows Update troubleshooter. This can be accessed by going to “Settings,” then “Update & Security,” and then “Troubleshoot.”

Steps for Windows Troubleshoot to fix this Error code 00×80041015

  1. Firstly, Go to Start menu option

Windows troubleshoot

  1. Press–  Settings tab to view and customize the areas of your system
  2. Next, press to Search button option  and then click to Troubleshoot option
  3. Press on to Troubleshoot go for  “Other Troubleshooter” option 
  4. Similarly, in the Other Troubleshooter tab, select the fourth option “Windows Update” and hit on Run button option.
  5. Finally, we find out that Windows Troubleshooting is finished and the troubleshooter made some changes to their system.
  6. Press to  Yes button option  to fix this issue

Reset the Windows 10 Update components by executing the following commands in a command prompt run as an administrator:

  • net stop wuauserv
  • net stop cryptSvc
  • net stop bits
  • net stop msiserver
  • ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
  • ren C:\Windows\System32\catroot2 catroot2.old
  • net start wuauserv
  • net start cryptSvc
  • net start bits
  • net start msiserver

If these steps do not resolve the issue, it is recommended that the user contact Microsoft support for further assistance.

In conclusion,

Error code 0x80041015 is a common issue that can occur while trying to install updates on Windows 10 update systems. By following the above steps, users can resolve this issue and successfully install windows 10 updates on their systems.

If you have problem in doing this method, we recommend you to chat with our experts. I am sure they will guide you and help resolve this issue. You can also visit website for more details and information.

More details for this method at https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows

[Fixed] Microsoft Office 365/ 2021/ 2019/ Error Code 30094-4

Error code 30094-4 is a Microsoft Office 365 error that typically occurs when there is a problem with installing or updating the Office software. The error message may appear as 30094-4 Office 365/2021 installation has failed.” This error code 30094-4  can occur due to various reasons

Error Code 30094-4

Step 1. Disable Firewall and Antivirus to fix Office 365/2021 Error Code 30094-4 : 

Disable any antivirus program or firewall temporarily to check if it is causing the issue.

Temporarily disabling Defender or Antivirus

Procedure to disable windows firewall:

  1. Firstly Start and type Windows Security  for search.
  2. Select to Windows Security application >> go to Virus & protection ; >> under Virus threat protection >>settings : select Manage settings.
  3. Real-time protection  Off

Procedure to disable Antivirus:

  1. Open an Antivirus application installed on the computer.
  2. After that, click to settings, go to real time protection and next Turn Off
  3. Select Turn Off real time protection option .
  4. Navigate to the Antivirus firewall.
  5. Turn off the Antivirus firewall.

Use the Microsoft Office 365/2021 installation troubleshooter:

Microsoft provides a free Office365/2019 installation troubleshooter that can help you diagnose and fix issues related to installing or updating Office 365/2021. You can download and run this troubleshooter from the Microsoft website.

Clean boot your device: A clean boot will start your device with only the necessary services and programs running, which can help identify if any third-party software is interfering with the Microsoft Office 365/2021 installation or update process.

Update Windows: Microsoft frequently releases updates to fix bugs and improve the performance of Windows. Check if there are any pending updates for your device and install them before attempting to install or update Office 365/2021 Error 30094-4.

STEP 3: SFC Scan to fix Office 365 /2019 Error Code 30094-4 :

  • Log in to an administrator in the Windows Terminal

SFC SCAN

  • Type  SFC /SCANNOW on window command prompt 
  • Wait for the scan to complete it 

You will get the following message on the home windows command “Windows Resource Protection may also shows that SFC application detected no integrity troubles or determined corrupted or damaged archives however may want to no longer  restore some of the archives or documents .

Following the steps below:

  • Download the Microsoft Office365/2021 Support and Recovery Assistant utility.
  • Run the downloaded file SetupProd_OffScrub.exe application.
  • Install the Microsoft recovery tool.
  • When the set up is completed, click on Agree the time period and rules and regulations through clicking Yes.
    Wait till the Microsoft Support and Recovery Assistant troubleshooting the difficulty completes.
Select the checkbox, at the left of the Office product which you have identify to pick out all the set up Office 365 merchandise and click on Next.

Install Microsoft office :

  • Open Office My Account through going www.office.com/myaccount and Login to Office account the use of your registered e-mail ID and password.
  • Click on set up Option under the Office product in your account.
  • Save the installer setup archives or archieves if its triggered and run it as soon as down load is done.
  • Do not no longer  go offline mode or reboot the laptop or device system as soon as set up is initiated.
  • Click on the end button as soon as the application is set up completely.

Office Reinstall :

  • Open Office My Account with the using  going http://www.office.com/myaccount and Login to Office account the use of your
    registered e-mail ID and password.
  • Click on set up Option below the Microsoft Office 365/2021 product in your account.
  • Save the installer setup archives or files if its brought about and run it as soon as download receives achieved .
  • Do no longer go to offline mode or reboot the laptop or system as soon as set up is initiated.
  • Click on the end button as soon as the application .

In Conclusion,

If you have problem in doing this method, we recommend you to chat with our experts. I am sure they will guide you and help resolve this office 365/2021 Error code 30094-4 . You can also visit website for more details and information.

More details for this method at https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows

Solutions to fix Windows 10/11 Update Error Code 0x8024800c

Error code 0x8024800c is a timeout problem that can occur from a problem with the data store SDF folder. Users have resolved the installer encountered an windows 10/11 update Error code  0x8024800c difficulty by means of clearing the data kept for Windows Update. Repairing the system document files is any other attainable Windows 11 Update error 0x8024800c. 

Error code 0x8024800c

Causes of Windows 10/11 Error Code  0x8024800c :

  • Damaged device files– Some system documents want a repair.
  • An out-of-sync Software Distribution cache – The Software Distribution records keep is out of sync, which means this error 0x8024800c  is a timeout trouble (it has a WU_E_DS_LOCKTIMEOUTEXPIRED end result string).
  • Corrupted Windows 10 Update elements – Error 0x8024800c is prompted by way of inaccurate Windows 10 Update factors (files).
  • Now that we recognize the motives at the back of this problem, let’s get to the genuine solutions.

Windows Troubleshoot to fix error code 0x8024800c 

Windows troubleshoot

  • Firstly, go to the Start menu
  • Click –  Settings tab to view the settings and customise the areas of your PC
  • Next, tap on Search button and then click on Troubleshoot option
  • Once you click on Troubleshoot go to  “Other Troubleshooter” option
  • Similarly, in the Other Troubleshooter tab, pick out the fourth alternative “Windows Update” and hit on Run button
  • Windows Troubleshoot
  • Finally, we observed that Windows Troubleshooting is accomplished and the troubleshooter made some modifications to his/her PC At last tap on the Yes button to fix this issue
  • Windows Troubleshoot

SDF Cleaning Method

In this method, we recreate the software program application distribution folder via deleting all quick archives in it.
  • Go to C:/ drive, then open the home windows named folder in it 
  • Open Software Distribution folder (SDF)
  • Open the Data Store folder and then delete all archives and folders in it
  • Returned to the Software Distribution folder, open the Download folder and delete all documents in it
  • Note: At the same time as deleting, it can additionally be instant for admin permission. If you are log in as an admin user. virtually click on to  sufficient to proceed

Run and  Sfc scan to fix  windows 10/11 Error code 0x8024800c

  • Click Win + X to open the Power User menu.

SFC SCAN Error code 0x8024800c

  • Select the Run alternative from the menu list. Alternatively, use the Win + R keyboard 
  • shortcut once directly to get acess to the Run command box.
  • Type “cmd” in the text box container and press Ctrl + Shift + Enter.
  • When UAC seems on the screen, click on Yes to open the Command instantaneous as an administrator.
  • In the Command Prompt window, type the under command and hit Enter:
  • sfc /scannow
  • Wait for the scan to complete. This might also take a while, so be patient.

Sfc scan 

  • Right click windows start button 
  • Select Terminal ( Admin )
  • Type in sfc /scannow and click enter, wait till scan completes.

Nslookup for server

  • open command prompt
  • And type nslookup update.microsoft.com

Now for the DISM scan

  • Firstly, right tap on Command Prompt and select Run as Administrator
  • After that, type the following commands and Press the Enter key after each command
  • exe /Online /Cleanup-image /Scanhealth
  • exe /Online /Cleanup-image /Restorehealth
  • To close the Administrator prompt
  •  Tap Exit in the Command Prompt window and then press to Enter

Secondly Go to Reset this PC or System , select option to  Reset PC or System . Then choose from the options and/or settings in the given table below

In case we want to reset the Windows 10/11 operating system system. Refer the steps down  to reset the device or pc . Refer the steps below  to reset the system or pc 

Disclaimer: We believe you to do the again up until now than we proceed these steps, in the path of reset Windows 11 /Windows 10 set up the functionality that all your archives archives and settings will be misplaced or misplaced in the course of the reset process.

Reset windows 10 ?

  1. Select the Start button option  > Settings > System > Recovery, and then to Open Recovery settings.
  2. Go to Reset this system , select option to  Reset system . Then select from the options and/or settings in the given table 

Reset  windows  11 ?

  • Select the Start button > Settings > System > Recovery, and then Open Recovery settings.
  • Go to Reset this PC, pick out out selections to Reset PC. Then pick out out from the choices and/or settings in the given desk

 Conclusion:

If you have problem in doing this method, we recommend you to chat with our experts. I am sure they will guide you and help resolve this issue.

Our tech experts will diagnose the issue for free of cost, incase if you want our techs to work and fix the issue there will be minimal charges applicable.

More details for this method at https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows

 

Easy Fix how to speed up your Windows 11 PC

If your home windows 11 laptop or system  is lagging or taking a whilst to function or perform duties that need  to be almost  instant, you may additionally be questioning how to speed up your windows 11 laptop or computing device computer. Windows 11 is Microsoft’s latest operating system, but it can still slow down that have plagued Windows 11 computers for decades. With some simple and easy way we can clean-up and do maintenance, you can run Windows 11 fast.

Speed up windows 11

If you upgraded to Windows 11 from an older version of Windows 10, chances are your computer contains a bunch of temporary files and unused programs/ non compatible apps that are putting a strain on your machine. there are chances older program files or broken registry or missing drivers that need to be updated. 

How to speed up Windows 11:

Restart your device : 

Many of us are guilty of leaving our computers in “sleep” or “standby” mode for weeks, or even months, but restarting your computer every day once is one of the simplest ways to speed up Windows 11. Restarting your Windows 11 computer is a way for it to refresh itself and close unwanted things running in the background. By restarting a computer or laptop everyday or often, it can fix several technical issues you may be experiencing, as restarting your computer also resets the underlying processes and drivers that are useful for the system to run properly.

To restart Windows 10/11, click the Windows icon on your then click the “power” icon. Next, click the “restart” icon.

Ensure you restart the system on daily bases.

Windows 10/11 Update your system: 

Windows 10 updates often contain fixes for all the bugs  and it also updates drivers which are required for the PC, and they also refresh the operating system’s built-in firewall windows defender. 

So, even though it may take a few moments of inconvenience, updating is always a wise choice to keep the windows operating up to date

Steps to update your Windows 11 PC: 

Click the Windows 11 start button and Click settings, then select windows 10/11 update, click “Check for updates.” Windows should automatically begin downloading any available updates.

  1. Once you install updates, click “Restart now” 
  2. Disable apps from running automatically.

Usually too many apps opening automatically when you start or restart your Windows 11 PC can cause the computer or laptop to run slow. You may not even realize that apps are starting themselves up in the background, let’s disable these apps from the startups.

  • Click the Windows icon on your taskbar then type “startup.”  
  • it will open “Startup Apps” in the Start menu. 
  • Click “Startup Apps” to enter this setting. 
  • You’ll see a listing of all the apps that have the alternative to begin automatically,
    On the proper aspect of every app that is set to begin robotically will be a toggle announcing “On,” set to “Off”

Check for virus or adware or malware running in the windows 10/11 PC :

Regularly run to antivirus scan, defender scan and spyware scan on the PC or  laptop , since you keep browse online, A list  of unwanted cookies and  errors  and cache will get into windows 10/11 PC  or download programs and file or unwanted spam emails with attachment etc downloaded on the windows PC or laptop  . Scan PC everyday that will keep the system away from threats and virus  .

Check for sfc scan to fix Easy speed up your Windows 11 PC 

  • Right click windows start button 4

Sfc scan

  • Select Terminal ( Admin ) and type in 
  • Do   sfc /scannow and press enter , wait till scan done. 

How to remove  unused apps

In  Windows 11 operating system there is something called storage tool, which can also be used to uninstall any apps you don’t need, freeing up more storage space it will  potentially help speed up your computer. 

Steps to uninstall unused apps on Windows 11 the use of the Storage device :

  • Select Start > click on Settings > pick out System > choose Storage > Cleanup hints . Open Storage settings
  • Select the brief files, unused files, documents synced to the cloud, or pick out unused apps you prefer to remove, then click on on the Clean up button for every section
  • Still you going through the  windows 11 gradually difficulty

How to reset windows 11 ?

  •  Select the Start button option  > then  Settings >go to  System > Recovery, and then  Open  to Recovery settings.
  • Go to Reset this windows 11 pc or system , choose option  to  Reset PC. Then choose from the options and/or settings in the given table 

Conclusion:

If you have problem in doing this method, we recommend you to chat with our experts. I am sure they will guide you and help resolve this issue.

Our tech experts will diagnose the issue for free of cost, incase if you want our techs to work and fix the issue there will be minimal charges applicable.

More details for this method at https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows

How to Fix Windows 10/11 Update Error Code 0x80073701

If you have encountered the windows 10/11 error code 0x80073701 on your computer, it is possible that you ran into issues while installing Windows 10 updates. This error code 0x80073701  can happen for a variety of reasons, however fortunately, there are a few matters you can attempt to fix it 

Error code 0x80073701

In this article, we will stroll you through some troubleshooting steps, so you can get your Windows 11 updates 0x80073701 back on track.

Causes Windows 10/11 Update Error 0x80073701 :

A Windows 10 Update error commonly  occurs during the  process of update .If you’re facing an error 0x80073701 during Windows 11 Update, The error code 0x80073701 can happen for several issues, but it commonly happens because the files are damaged or corrupted.

There are a few different matters that can explain this windows 10 error 0x80073701. Some are listed below : 

  1. The Windows 10 Update Service provider is no longer running
  2. Not sufficient disk space reachable to deploy the updates
  3. There is a hassle with your Internet connection.
  4. The third-party antivirus application is blocking off Windows 11 Update error 0x80073701.

With this windows 10/11 error code 0x80073701, you will typically get a word saying that , “Updates Failed, There had been issues installing in some windows updates, however we’ll strive once more later.”. This message additionally has an windows 10 update error code 0x80073701.

1. Reboot Your system and Try Again to fix it  :

If you’ve been making an attempt to Windows update and have been getting this 0x80073701 error, you probably have a broken, damaged or lacking file that Windows 10/11 Update error 0x80073701 desires to work properly. In this scenario, simply restart your laptop and attempt updating Windows once more

Run and  Sfc scan to fix  windows 10/11  update error code 0x80073701

  1. Click Win + X to open the Power User menu.
  2. Select the Run alternative from the menu list. Alternatively, use the Win + R keyboard 
  3. shortcut once directly to get acess to the Run command box.
  4. Type “cmd” in the text box container and press Ctrl + Shift + Enter.
  5. When UAC seems on the screen, click on Yes to open the Command instantaneous as an administrator.
  6. In the Command Prompt window, type the under command and hit Enter:
  7. sfc /scannow
  8. Wait for the scan to complete. This might also take a while, so be patient.

Sfc scan to fix windows 10 Error Code 0x80073701 

  • Right click windows start button 

SFC SCAN

  • Select Terminal ( Admin )
  • Type in sfc/scannow and click enter, wait till scan completes.

Nslookup for server

  • open command prompt
  • And type nslookup update.microsoft.com

The server name should have ISP name in it, if  “unknown appear ” continue the below steps, or  talk to experts on chat to diagnose the issue 

Now for the DISM scan

  • Firstly, right press on to Command Prompt and select Run as Administrator
  • After that, the follow commands and Press the Enter key after each command 

Dism scan

  • exe /Online /Cleanup-image /Scanhealth
  • exe /Online /Cleanup-image /Restorehealth
  • To close the Administrator,
  •  Tap Exit in the Command Prompt window and then press Enter

Windows Troubleshoot 

  • Firstly, go to the Start menu
  • Click –  Settings tab to view the settings and customize the areas of your PC
  • Next, press on Search button and then click on Troubleshoot option
  • Once you click on to Troubleshoot go to “Other Troubleshooter” option
    Follow the steps under to reset the system
  • Similarly, in the Other Troubleshooter tab, choose the 4th option button “Windows Update” & hit on Run button option 
  • Windows Troubleshoot
  • Finally, we found that Windows Troubleshooting is done and the troubleshooter made changes to his/her system
  • At last tap on the Yes button to fix this issue
  • Windows Troubleshoot

SDF Cleaning Method 

So, we recreate the software program application distribution folder in home windows through deleting all files in it.

  • Go to C:/ drive, then open the home windows named folder in it 
  • Open Software Distribution folder (SDF)
  • Open the Data Store folder  in Software Distribution folder and then delete all archives and folders in it
  • Again returned to the Software Distribution folder, and open the Download folder and delete all documents in folderNote: while deleting, it can also be immediate for admin permission. If you are log in as an admin user. Simply press on adequate to proceed it 

In case if the issue still persist after following all instruction above, then we need to reset the Windows 10/11 operating system. Follow the steps below  to reset the system

Disclaimer: We propose you do the  back up earlier than we proceed these steps, in the course of reset Windows 11 and  Windows 10 set up capability that all your archives files and settings will be misplaced or lost throughout the reset process.

How to reset windows 10 ?

  1. Click the Start button > Settings > System > Recovery, and then select  Open Recovery settings.
  2. Go to Reset this device , choose alternative to Reset the system . Then select out from the preferences and/or settings in the given table

How to reset  windows  11 ?

  1. Click the Start button > Settings > System > Recovery, and then Open Recovery settings.
  2. Go to Reset this PC, select out choices to Reset PC. Then pick out out from the options and/or settings in the given desk

In conclusion : 

Error code 0x80073701 is a common issue that can occur while trying to install updates on Windows systems. By following the above steps, users can resolve this issue and successfully install updates on their systems.  If you have problem in doing this method, we recommend you to chat with our experts. I am sure they will guide you and help resolve this issue. You can also visit website for more details and information.

Solutions to fix Windows 10/11 Update Error Code 0x80240438

Error code 0x80240438 is a Windows 10/11 Update error that usually indicates an issue with the Windows 10 Update service or its components in windows 10 and windows 11 operating system. This windows 10 error 0x8024038 can occur for a variety of reasons, including corrupted system files, conflicts with other software, or issues with the network connection.

Error Code 0x80240438

Here are some potential solutions to resolve error code 0x80240438:

Restart Windows Update components: Sometimes, restarting the Windows 10/11 Update components can resolve this error 0x8024038.

Follow the given commands and open  windows command prompt 

  • net stop wuauserv
  • net stop cryptSvc
  • net stop bits
  • net stop msiserver

Run C:\Windows\SoftwareDistribution SoftwareDistribution.old

Run C:\Windows\System32\catroot2 catroot2.old

  • net start wuauserv
  • net start cryptSvc
  • net start bits
  • net start msiserver

Check your web connection:

 Make certain your net connection is secure and working properly. Check your network settings and try to download a small file from the internet to see if the connection is working.

Disable your antivirus software: Sometimes, antivirus software can interfere with the Windows 10 Update service. 

How to temporarily Disable Antivirus :

  1. Open Antivirus Application (McAfee or Norton or AVG) mounted on the computer.
  2. Click on settings and go to actual time protection
  3. Select Turn Off actual time protection
  4. Navigate to the Antivirus firewall and choose Turn off Antivirus Firewall.

 How to disable windows defender

  1. Open Windows Security
  2. Open Virus & risk in windows secure window
  3. click on to Manage settings, under the Virus & threat protection
  4. Switch Real-time safety to Off

Run the Windows 10/11 Update troubleshooter to fix Error Code 0x80240438 :

troubleshoot

The Windows 10 Update troubleshooter is a built-in tool in Windows 11 update error 0x8024038 that can help diagnose and resolve update-related issues.

  1.  To run the troubleshooter 
  2. Go to Settings  and  windows 10 /11 Update & Security  go to  Troubleshoot and then Additional troubleshooters .
  3. Windows 10 Update.

Clear Windows 10 /11 Update Cache 

  1. Press Windows + R to open the Run box.
  2. Type services.msc to open Windows Services.
  3. In the listing of services, appear for Background Intelligent Transfer Service. Right-click on it and choose Stop.
  4. Right-click on Windows Update carrier in the listing and select the choice Stop.
  5. Open the File Explorer and use the Window and E keys.
  6. Copy and paste the course path and follow  in the navigation bar.
  7. Select all (Ctrl + A) the documents and folders in this area and the Delete (trash) icon at the top to get rid of all the archives files and folders in this folder.
  8. Go back to Windows Services as in Steps 1 and two above.
  9. Right-click on the Background Intelligent Transfer Service and click on Start to allow this service.
  10. Right-click on Windows Update error 0x8024038 Service and allow it with the aid of choosing Start in the context menu.

Reset Windows 10 Update components

If none of the above solutions work, you can try resetting the Windows 10 Update components.

Follow the given Commands :

  1. net stop bits
  2. net stop wuauserv
  3. net stop appidsvc
  4. net stop cryptsvc

Del “%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\.”

Rmdir /s /q “%SystemDrive%\Windows\SoftwareDistribution”

Rmdir /s /q “%SystemDrive%\Windows\System32\catroot2”

  • sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
  • sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
  • sc.exe sdset appidsvc D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
  • sc.exe sdset cryptsvc D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)
  • net start bits
  • net start wuauserv
  • net start appidsvc
  • net start cryptsvc

 Conclusion:

If you have problem in doing this method, we recommend you to chat with our experts. I am sure they will guide you and help resolve this issue.

Our tech experts will diagnose the issue for free of cost, incase if you want our techs to work and fix the issue there will be minimal charges applicable.

More details for this method at https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows

[FIXED] Windows 10/11 Update Error Code 0x80246017

Error code 0x80246017 is a Windows Update error that indicates a problem with downloading or installing Windows 10/ 11 updates on your system. When you encounter this windows 10 Error Code 0x80246017  you may see a message that reads “There were problems installing some updates, but we’ll try again later.

error code 0x80246017

There are several reasons why you might see this error code 0x80246017:

Network connection issues: If your network connection is unstable or too slow, you may not be able to download windows 10 updates from Microsoft servers, leading to the windows 10 0x80246017 error.

Corrupted update files: Sometimes, the update files downloaded by Windows Update can become corrupted, which can cause the update installation to fail.

Software conflicts: Conflicts with third-party software installed on your system, such as antivirus programs, firewalls, or other security software, can interfere with the update installation process and cause the windows 11  0x80246017 error.

System files corruption: If your system files are corrupted, this can cause Windows 10 Update 0x80246017  to fail when trying to install window 11 updates, resulting in the 0x80246017 error.

Troubleshoot this windows 10/11 error code 0x80246017 , you can try the following steps: 

  • Firstly, go to the Start menu
  • Click –  Settings tab to view the settings and customise the areas of your PC
  • Next, press on to Search button and then click on Troubleshoot option button
  • Once you click on on Troubleshoot go to “Other Troubleshooter” option
  • In the Other Troubleshooter tab, pick out the fourth choice button “Windows Update” and hit on Run button
  • Windows Troubleshoot
  • Finally, we located that Windows Troubleshooting is finished and the troubleshooter made some modifications to his/her PC
  • At last tap on the Yes button to fix this issue
  • Windows Troubleshoot

Check your internet connection:

Ensure that you have a stable and fast internet connection. If it’s  necessary, reboot  your modem and router.

Disable third-party software: Temporarily disable any third-party security software, including antivirus programs, firewalls, or any other security software, to see if they are causing the issue.

How to temporarily Disable Antivirus :

  1. Open Antivirus Application (McAfee or Norton or AVG) mounted on the computer.
  2. Click on settings and go to actual time protection
  3. Select Turn Off actual time protection
  4. Navigate to the Antivirus firewall and choose Turn off Antivirus Firewall.

 How to disable windows defender

  1. Open Windows Security
  2. Open Virus & risk in windows secure window
  3. click on to Manage settings, under the Virus & threat protection
  4. Switch Real-time safety to Off

Clear the Windows 10/11 Update cache:

Clear the Windows 10/11 Update cache by opening the Command Prompt as an administrator and typing in the following command: 

“net stop wuauserv && rmdir /s /q %windir%\SoftwareDistribution && net start wuauserv”.

Solve Windows 10 Update cache the use of the steps here: error 0x80246017

  1.  Press to Search and type Services.
  2.   Then Press – Enter.
  3.  Go  to the Background Intelligent Transfer Service. Right Tap on it and then Stop.
  4.  View for it – Windows Update.
  5. End this in the equal way we cautioned above.
  6.  Now, click on Win+E and navigate to folder
  7.  Hit “Ctrl+A” to choose all gadgets introduced there and then  Press – Delete. Another way you can moreover right-press and pick out the Delete alternative button.
  8. Again go on to the Services window.
  9. Right-click on “Background Intelligent Transfer Service” and “Windows Update” one by one and press Start.

Perform a system file to fix this windows 11 Error Code 0x80246017: 

  • Open the Command Prompt as an administrator 

SFC SCAN

Nslookup for server

  • open command prompt
  • And type nslookup update.microsoft.com

The server name should have Microsoft in it, if it has continued the below steps, if it doesn’t have your PC is not connecting to Microsoft server, talk to experts on chat.

Now for the DISM scan 

  • Right click on on Command Prompt and Choose Run as Administrator

Dism scan

  • Type the commands and Press to Enter key after the  each command
  • exe /Online /Cleanup-image /Scanhealth
  • exe /Online /Cleanup-image /Restorehealth
  • To close the Administrator tab 
  •  Press Exit in the Command Prompt window and then tap Enter

If none of the above steps work, you can try resetting your Windows 10 Update components or performing a clean installation of Windows. Additionally, you may want to contact Microsoft support for further assistance.

Disclaimer: We advocate you do the  back up earlier before we proceed these steps, in the direction of reset Windows 11 and Windows 10 set up functionality that all your archives files and settings will be misplaced or misplaced all through the reset process.

How to reset windows 10 ?

  1. Choose the Start button option  > Settings > System > Recovery, and then to Open Recovery settings.
  2. Go to Reset this system , select option to  Reset system . Then select  from the options and/or settings in the given table 

How to reset  windows  11 ?

  • Select the Start button > Settings > System > Recovery, and then Open Recovery settings.
  • Go for Reset this system, pick out alternatives to Reset PC or system. Then select from the ways  and/or to settings in the given desk below 

In Conclusion,

If you have problem in doing this method, we recommend you to chat with our experts. I am sure they will guide you and help resolve this issue. You can also visit website for more details and information.

However, we give you assurance about your money and the service. If you like to see the procedure for a paid support, you may ask the Tech available online here on this page.

More details for this method at https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows

Solutions to fix File Explorer Freezing /not Responding on windows 10/11

File Explorer is an important device tool that permits convenient searching and managing of documents and folders saved on a Windows PC. If one day, the file administration app decides now not to work correctly, as in now not opening, no longer loading, or crashing, or it shows file explorer freezing on windows 10/11 , your workflow will certainly get interrupted. Just take a few minutes of your time, cautiously go through the steps below, and put all this nonsense at the back of you for good.

File explorer freezing

Restart File Explorer on Wiondows 10/11

If File Explorer has begun to crash or emerge as unresponsive, it might  be a transient glitch. It really is without difficulty solved by using closing and restarting File Explorer. To do that, you will want to open Task Manager.

In older versions of Windows 10, you should open Task Manager by using right-clicking the taskbar, however that no longer works. Instead, press Ctrl+Alt+Del, and then select Task Manager. In the Task Manager, locate Windows 10/11 Explorer in the listing of apps and then click on it. In the decrease proper corner, click on Restart.

Restart your system to fix File Explorer On windows 10

In many cases, restarting File Explorer will repair the problem. But if it does not, you might  be in a position to solve the problem by way of restarting your complete PC. Do this in particular if it has been a lengthy time due to the fact you have shut off your computer. Click Start, then the Power icon, and then select to Restart.

Perform SFC scan to fix File Explorer on windows 11

  1. Open Command Prompt and Run as administrator

SFC SCAN

  • After that, Follow the given  command and press Enter
  • sfc /scannow
  • Finally, reboot your pc or system 

Nslookup for server

  • Open command prompt
  • And Press  nslookup update.microsoft.com

The server identity has to have Microsoft in it, if it has persisted the under steps, if it would not have your PC is now not connecting to Microsoft server, speak to experts on chat.

Now for the DISM scan

  • Firstly, Tap on Command Prompt and pick out Run as Administrator

Dism scan

  • After that, type  the given instructions and Press the Enter key after every command
  • exe /Online /Cleanup-image /Scanhealth
  • exe /Online /Cleanup-image /Restorehealth
  • To shut the Administrator,
  • Tap Exit in the Command Prompt window and then press Enter

Disable or uninstall antimalware software

Every system must have an antivirus or antimalware software program is running — it is an essential protection and protection precaution. But if you use a third party vendor’s antimalware program, it would possibly be conflicting with File Explorer. To check if this is the issue, uninstall it, restart your computer, and see if the error persists. If File Explorer works normally, swap to the built-in Windows Defender or strive for a one of a kind third-party antivirus suite.

Check for updates

it is feasible  that a malicious program or bugs or software program incompatibility might be stopping File Explorer from working properly. The way to make certain it really is no longer inflicting File Explorer system defects is to take a look at your pc for windows updates and set up any updates which are ready to be installed.

  1. Click Start and then Settings.
  2. In the Settings window, make certain you are on the System tab.
  3. At the top right, click on Check for updates.
  4. Windows will download and install any updates that are available.

Reset the windows factors

Disclaimer :We recommend you to do the reverse up before we do this, during reset Windows 11 and windows 10 installation means that all your lines and settings will be lost during the reset process.

Windows 10 – Reset your PC

  1. Select launch> Settings> System> Recovery. Open Recovery settings.
  2. Coming to Reset this PC, choose Reset PC. Choose from the options and/ settings in the table .

Windows 11 – Reset your PC

  1. Select launch> Settings> System> Recovery. Open Recovery settings.
  2. Coming to Reset this PC, choose Reset PC. Choose from the options and/ settings in the table .

In Conclusion,

If you have problem in doing this method, we recommend you to chat with our experts. I am sure they will guide you and help resolve this issue. You can also visit website for more details and information.

However, we give you assurance about your money and the service. If you like to see the procedure for a paid support, you may ask the Tech available online here on this page.

More details for this method at https://support.microsoft.com/en-us/help/929135/how-to-perform-a-clean-boot-in-windows